Sunday, March 8, 2009

Rod holder "rocket launcher"

1 1/2" PVC. holes drilled through 2x4 with a circle cutter. I ran the 2x4 through the thickness planer on a fixture that held it tilted. I drilled and ran screws through the 2x4 and pipe to hold in place. The rods bottom out on the screws. I made stainless brackets that fit my Bert's custom tackle track. I sanded the pvc to remove marking and scuff. Sprayed with Kilz primer, good to go. When I'm done for the day the rocket launcher is easy to remove.

1 comment:

  1. Gear cutting tool design and production requires much specialized knowledge, which has been acquired and refined over generations.
    capital tool industries